Dirty and sometimes blackened tile joints are due in part to soap scum or mineral deposits, but also to mold. If these can cloud the tile joint in addition to being a health risk, it does not matter, these natural remedies you can easily clean them and bring them back to their full shine.
Mold covered tile joints – Source: spm
How to clean bathroom tile joints and remove mold?
Being its porous surface, the joints of the tiles get dirty pretty fast and therefore require regular cleaning once every two weeks to maintain them. This single gesture may be enough to facilitate its thorough cleaning since you will face less dirt. If, on the other hand, you have to deal with a wall especially covered in mold stains and other types of dirt, these two cleaning recipes will give new life to the tiles in your bathroom.
Cladding joint cleaning – Source: spm
– clean seals tiling with ammonia and sodium bicarbonate
One of the most effective techniques to clean your grout and make your tiles shine is to prepare a mixture of 7 glasses of warm water, half a glass of baking soda and 1/3 glass of ammonia. You will need to ventilate the room first.
After the baking soda has completely dissolved, put everything in a spray bottle. to more easily orient the parts to be treated. If you prefer, you can pour the solution into a container and soak a clean cloth to rub against the grout lines.
If you are using the spray bottle, spray the joint until it is completely wet and then leave the mixture on for 5 minutes or more. then get ready a stiff bristle brush then rub using firm pressure without forcing.
With a damp, well-wrung clothwipe problem areas to remove dirty liquid and repeat if necessary before wiping dry with a dry cloth.
Also keep in mind that the stain-removing power of baking soda has nothing to envy to that of white vinegar. So you can opt for the latter instead. If you’re also dealing with tough stains, a great way to whiten tile joints. is to use a mixture of baking soda and hydrogen peroxide.
– How to use baking soda and Water oxygen to clean tile joints?
Cleaning tile grout with baking soda and a stream of hydrogen peroxide – Source: spm
All you need to do is mix hydrogen peroxide with baking soda in a bowl to form a paste. Apply to joints and leave for a few minutes before rubbing with a brush to whiten the surface. Finally, wipe with a clean, damp microfiber cloth to rinse, then towel dry.
How to prevent the formation of mold in the joints of the tiles?
As mentioned above, one of the best ways to prevent mold stains from forming is to keep regular joint cleaning once or twice a week. This will make it easier to use the aforementioned tricks.
Another reflex is to dry the wet tiles. Although this gesture is usually intuitive, it is worth remembering its importance to avoid product stains without rinsing.
There is also a dedicated sealer for covering tile grout lines a protective film that prevents staining and limit mold growth.
By adopting these solutions and tips, your bathroom tile joints will be more protected than ever. It is also worth remembering the importance of ventilating this room to avoid humidity, which facilitates the installation of mold.
