The iron should be cleaned periodically, especially if you use it frequently. Otherwise, you risk dirtying the clothes to be ironed due to the accumulation of dirt and limescale and damaging your appliance. However, there are some tricks to clean the iron easily and cheaply. Find out which ones!
Clean the iron tank to remove limescale
One of these solutions consists of water and citric acid (one tablespoon of citric acid for half a liter of water). Mix the water with the citric acid in a cup and then pour directly into the compartment of the griddle reserved for water. The steam is then activated and the water is discharged. Remember to use a container to receive it.
In this way you can remove all the dirt that is deposited inside the iron every time you use it. Once the interior is clean, the next step is to clean the exterior of the device as well as the sole that we will see.
Also read: Unclog the sink in 5 minutes with the bottle trick: no more clogs
Clean the soleplate
Dishwasher tablets – Source: spm
Cleaning the exterior of the iron can be done easily, quickly and economically. To clean the sole of the iron, take a dishwashing tablet and rub it directly on the area to be treated, insisting on the blackened parts, you will notice that they disappear slowly and effortlessly. You can use it on the dry or wet sole.
Once this process is finished, dry the device with a well-wrung microfiber cloth and you will find it shiny, like new.
use distilled water
The main problem caused by dirt deposited on the iron is water. By remaining inside the device, water not only stagnates, but it can also damage certain components over time, up to the degradation of the device itself.
However, water is necessary for the proper functioning of the iron. Therefore, it is advisable to use distilled water and avoid tap water that is laden with limestone.
Other tips for cleaning the iron
Baking soda and candle wax to clean the griddle
Baking soda – Source: spm
To clean lime stains on the soleplate of the iron, you can use baking soda. Mix baking soda and water in a bowl until a paste forms. Then apply it to the already hot plate with a sponge and rinse. Finally, finish by wiping down with a clean, damp cloth before using the device again.
To prevent clothes from sticking to the iron, you can use a mixture of baking soda and lemon and you will have an effective cleaner.
Another trick is to rub a candle against the surface of the hot iron, then turn on the steam function. Finally, remove the excess wax with a clean cloth.
Also read: Put a plastic bag on the broom and say goodbye to the vacuum cleaner and the broom
Salt to clean the iron
Another option is to use coarse salt. Put several tablespoons of coarse salt on a cloth, turn on the iron and once hot rub. Then wipe it down with a clean cloth soaked in a few drops of dishwashing liquid.
For this reason, remember that it is important to periodically clean your iron to avoid the accumulation of limescale and guarantee its correct operation.
Also read: Three natural products will eliminate all mold in the house: an effective trick
