Clothes wear. Your sweatshirt with holes evokes your trip to the four corners of the world. Your ripped shorts remind you of your summer vacation and now it’s the turn of your favorite puffer jacket that has taken a good beating. Don’t know how to save her? No panic! You can always make it look great again by using the right material. Without sewing and with a little patience and skill, you can repair it and prolong its life. Discover our instructions to achieve it with a simple iron. We premiere!
Whether it’s a jacket, trousers, T-shirt or jeans, detecting a large tear or a small hole in the garment can be frustrating and, above all, annoying. Instead of throwing them away because you think they’ve had their day, choose to fix them up. But, what to do when you don’t know how to handle the thread and the needle? We have a solution for you. Did you know that there is a simple and effective method to give a second life to your garment? We explain how to proceed step by step. Follow the guide!
Your jacket has been hanging in the closet for a long time and you want to put it on? But this small hole prevents you from enjoying it. So the best way to fix it without sewing is to use the iron and other accessible tools.
Also read: Put orange peels in a bottle: the genius trick to save money
How to cover a small hole in the fabric of a down jacket? the iron trick
Down jacket with holes. source: spm
If you are one of those who do not like sewing work, the method that we are going to present to you could be suitable for you. This is what you need:
- A pair of scissors with a blunt tip
- a small piece of cloth the same color or material as the jacket
- a double sided tape
- An iron
- a towel or thin cloth
Now that you’ve collected the entire arsenal, follow these steps!
- Trim the excess batting that is sticking out of the hole in the jacket.
- Then take the piece of cloth and fold it in half. This will allow you to get two perfectly equal halves.
- Then stick the double-sided tape on one of the pieces you cut out.
- Pass the iron over this piece of fabric so that the glue adheres to the fabric.
- Then remove the film that protects the other side of the tape. You will see that the piece of fabric you just made has become sticky.
- Place the piece of fabric you prepared inside the hole in the jacket.
- Then put a towel or a thin cloth over the hole in the jacket so as not to damage the fabric.
- Then iron the hole area.
There you go, your jacket is like new!
Not a sewing genius? So you have understood that with a simple iron, you can repair a hole in the fabric of your garment. Feel free to adopt the other easy tips to mend it like a pro!
Repair a T-shirt, shirt or pants with holes with thread and a needle
A thick cotton thread on a needle. source: spm
This is the classic method of hand-repairing a tear in a garment. To apply it, just take a thread, a needle and scissors.
- Take the wire of your choice and cut it according to the size of your hole.
- Pass one end of the thread through the eye of the needle so that the needle is in the center of the thread.
- Close the two ends of the thread making a loop.
- Insert the thread into one corner of the hole, then tie a knot to secure it to the fabric.
- Along the entire length, sew the thread on both sides to tauten the fabric and make the hole disappear.
- Finally, tie a final knot and cut off the excess fabric.
For a more beautiful result, you can adopt this technique to create patterns of embroidery with the colors and shapes of your choice. The fabric will thus strengthen your piece and give it an original look. You can also, instead of tightening the hole, stop the fraying by performing a Manual overlock around the hole. Do not hesitate to complete it with shapes and bright colors.
Camouflage a hole in jeans with an iron-on fabric patch
Ripped jeans. source: spm
Are your jeans slightly torn at the knee? To prevent fraying over time, use a patch on ironing cloth Composed of an outer fabric and a thermo-adhesive layer on the inside, it is ideal for hiding holes and tears in your pants.
- To get started, turn on the iron and set the temperature to the “cotton” mode.
- Using scissors, cut out a piece of the patch, making sure to get a piece larger than the hole.
- Use the wrong side of the fabric to bring the two torn ends together.
- Once the patch is in place with the shiny side against the fabric, iron the hole area.
- Wait a few minutes for the patch to adhere well to the jeans.
- Then remove the protective paper film and look at the result.
The hole closed like magic!
Also read: How to get rid of the smell of a fireplace in the house? A secret ingredient is enough
So are you ready to repair your favorite parts? It’s your turn to apply some tips to give them a second chance! On your needles, get ready, go!
Also read: The most efficient way to heat your home without using a heater: it only costs one euro
