Vacuuming is an integral part of daily chores to remove dirt and dust. So our floors, our furniture and our surfaces are always kept clean. But do you handle this appliance perfectly? You’ve probably noticed this famous hole located at the end of its handle. Have you ever used it or do you just know what exactly it is for? You will be surprised how convenient it is. Discover its secret function to be able to get the most out of it.
Vacuum hose – Source: spm
What is the hole in the vacuum handle for?
Although many people have succumbed to the temptation to experiment with the new high-tech and modern robotic vacuums, many people are much more comfortable using their good old traditional vacuums to clean their homes. It is true that innovations are increasingly noticeable in household appliances, but some parameters do not change. In particular, this small hole visible in the hose of the classic vacuum cleaner. We have become so used to it that many times it goes unnoticed. However, its presence in the tube is not due to chance. It’s good for something special.
Generally, most people use it to control the suction power and it works by the way. However, manufacturers of vacuum cleaners have designed it for another function: this hole in the tube is mainly intended to minimize the risk of overheating of the vacuum motor, thus preventing its combustion.
Also read: Jeans with holes? Leave it as new, without leaving traces: 2 minutes are enough
Speaking of the pipe, have you ever considered cleaning it? It is fine to have frequent use of your vacuum cleaner to remove dirt at home or in the office, but like any other household equipment, this device must necessarily be maintained so that it works at its best and lasts over time. The hose, in particular, is a key component that is often put to the test. If you don’t maintain it regularly, it can get clogged and this clog can cause a lot of damage. Therefore, it is important to clean it quite often using the right products.
These are the steps to follow for safe and effective maintenance:
- Remove the vacuum hose from your vacuum (this is the outer tube that connects to the canister or bag). Pull the end of the hose out from the base of the vacuum and remove the other end from the main body. If this hose kinks, unscrew it before removing it from the appliance.
- Lay the hose down on a flat surface once you remove it.
- Push the broomstick through the pipe to remove any large clogs.
- To clean the inside of your pipe, opt for this highly effective duo: baking soda and white vinegar. Pour in ½ cup of the white powder and shake the pipe so that the baking soda covers the entire inside surface. Then slowly pour 120 ml of vinegar down the pipe. Leave the mixture to act for 2 or 3 minutes so that all the accumulated dirt encrustations come off.
- Rinse the hose with lukewarm water.
- Finally, hang the hose up to dry completely before reattaching it.
Aspire – Source: spm
What gesture to adopt before vacuuming?
Were you looking for an infallible way to perfume your home in a lasting way? It may surprise you, but the best way is to use the vacuum cleaner. Yes, this everyday ally is not only practical for eradicating dust, it also has other hidden benefits.
Also read: What is the hole in the side of the laptop for? saves you a lot of trouble
To fill the house with a pleasant aroma of freshness, you just have to open the vacuum bag and insert a well-scented wipe with cologne or any other aroma of your choice. This technique is very relevant after a recent work or a small construction reform: keep in mind that certain materials such as plaster, cement, paint or even enamel have strong odors that sometimes remain embedded in the walls. Now you have the perfect way to refresh rooms and wrap them in a pleasant aroma. Simply by vacuuming, with the trick that we have just revealed, you will get rid of annoying odors. Don’t forget to empty the tank regularly and change the scented wipes for even more effect.
Bag or bag vacuum cleaner: what are the differences?
| Bagged vacuum cleaners | Bagless Vacuums |
|---|---|
| Have a disposable paper or cloth bag to collect vacuumed dust and dirt | Use specific cyclonic and multicyclonic filtration technologies |
| Have a hood to access the bag. | Provide a transparent chamber to monitor the fill level |
| traditional look | more modern look |
| They are more hygienic for allergy sufferers because the bags are replaced less frequently. | They do not have bags to buy and are more friendly to the environment |
| Offers stronger suction and more efficient filtration thanks to the dust-retaining bag | Suction efficiency remains constant without risk of power loss |
| They are quieter because the bag dampens the noise | Induce less maintenance because the filters get dirty less quickly |
| Induce fewer oil changes but require more maintenance | Requires more oil changes but allows for more consistent dust management |
Also read: Why is there a hole in the airplane window? Its function is unknown and very useful.
