Nothing more banal than cutting a piece of adhesive tape. But obviously, if there are no scissors lying around, the matter is more complicated. But not impossible. There are a variety of tricks to cut this type of tape without this tool or even using the teeth. Quickly discover our practical methods!
Masking tape – Source: spm
Whether it is to cover notebooks, wrap gifts or pack boxes during a move, adhesive tape is always very useful to make our work easier. Except, almost all of us have been annoyed at least once because we didn’t have scissors handy to cut the tape. Many people trust their teeth to solve this problem, but it is far from pleasant. From now on you can experiment with a very simple trick to cut a piece of tape without using a sharp object.
This technical practice was shared on Tik Tok by the American influencer Austin Day. On his account, he shares with his subscribers the steps to easily cut a strip of duct tape. It even turns out that this method is commonly used in the film industry.
Also read: Put orange peels on the doorknob: solve one of the biggest problems in the house
That is how:
- First, establish the amount of tape you want to use.
- Then, fold the piece up and back, making a small triangle at the bottom.
- Hold the triangle shape with your thumb and pull the piece of tape up and down. And now, it doesn’t get more complicated than that!
This trick will not only help you cut the piece of tape with ease, but it will also allow you to create a small tab to easily hold your next piece of tape, making it increasingly easy to put on and take off.
An LED strip – Source: spm
Thanks to their flexibility and versatility, LED strips have become very popular and very easy to use.
Also read: What is the hole in the padlocks really used for? It has an important function
To use them correctly, here are some tips to keep in mind:
- First decide where you want to install the LED strip. You have to measure the area to calculate the cut: if the area is 93 cm long, for example, you can cut a section of 90 or 95 cm (remember that the cuts must be multiples of 5 centimeters!).
- Cut the strip along the dotted line (must be marked every 5 cm). To do this, you can use any pair of scissors. Attention: if the strip is cut outside the 5 cm cut line, the cut section will not work and cannot be reused later.
Can we nail an LED tape to install it?
Yes, it is indeed possible to nail LED light strips to a surface. Of course, you must make sure that the nails hold the strip perfectly and that they do not penetrate the LED light. Therefore, the nail should act as an arc on the light strip. The operation must be carried out carefully, because if you accidentally pierce the strip, you risk damaging the LED circuits.
Also read: How long can cooked pasta be kept in the fridge? Do not eat them after this time.
